Differences

This shows you the differences between two versions of the page.

--- pi:buster [2019/08/08 15:53] – slack
+++ pi:buster [2021/04/10 23:09] (current) – [User] slack
@@ Line 1: / Line 1: @@
-====== Raspbian Stretch basics ======
+====== Raspbian Buster basics ======
-Flash using balenaEtcher on Ted.
+Flash using balenaEtcher on Ted, or RPi have their own image writer now.
-Add blank file ''ssh'' to the boot partition to enable ssh server on first boot.
+Add blank file ''ssh'' to the boot partition to enable ssh server on first boot.  (Will be removed on boot.)
+Find on network with ''ping raspberrypi.local'', login with pi/raspberry, change password.
+Permanently enable ssh with ''sudo raspi-config'' -> Interfacing Options -> SSH.
-Find on network with ''ping raspberrypi.local''.
 ===== User =====
   sudo adduser slack
-  sudo adduser slack sudo
-  sudo adduser slack adm
+  for g in sudo adm gpio pi dialout cdrom audio video plugdev games users input netdev lpadmin i2c spi; do
+    sudo adduser slack $g
+  done
 ===== Apt =====
@@ Line 33: / Line 39: @@
 Copy over authorized_keys from ''alan''.
-  ssh-keygen -t rsa -b 4096 -C "dan.hetherington@gmail.com"
+  ssh-keygen -t rsa -b 4096 -C slack-np@walter
 Copy id_rsa.pub into any ''authosized_keys'' as needed.
+===== Static IP =====
+''Pi-hole'' arranges/messes with this, so if you're installing that maybe set the IP address that way.
+To set the hostname, use ''hostnamectl set-hostname walter'', and then fix up ''/etc/hosts''.